Monitoring Your Home Inspection – Made Simpler!
1. Structure Inspection
The house inspector should inspect the foundation of the house, the entryways and porches, looking for signs that indicate the condition of the house. Symptoms of trouble include sagging rooflines, signs of insect damage and rot and porches pulling away from the building. To test for hollow spots caused by insects, the inspector should probe the rim, which is the wooden support that sits on the foundation. The inspector should also check for certain types of cracks in the foundation to determine the condition of the foundation.
2. Interior Inspection
A good inspection includes a scan of the interior for signs of water leaks on the roof, walls and the floor. The inspector also checks for safety in the house, which involves checking the staircase and railing. The condition of the windows and doors is also checked to ensure they are in good condition. The cabinets in the kitchen and the kitchen countertops are also checked for integrity. The basement is checked for signs of water intrusion and structural problems.
3. Exterior Inspection
Inspection of the exterior involves assessing the eaves, decks and balconies. The home inspector checks for any drainage problems in the ground surrounding the house. The condition of the driveways and walkways is also checked to ensure safety. It is also important for the inspector to check the vegetation around the house to ensure roots do not interfere with the foundation. The inspection of the exterior does not involve inspection of geological conditions and outbuildings and fences.
4. Roof Inspection
Roof inspection involves inspecting the conditions of the roof by visual means. The inspector can get on top of the roof to do this or use binoculars while on the ground. A good inspector should be able to estimate the life of a roof in any given weather conditions. The safety of the roof, chimney, skylights and roof penetrations is also inspected during the roof inspection.
5. System Inspection
Housing systems such as the electrical system, plumbing system, heat and air conditioning are also checked during the house inspection. For the electrical system, the inspector should check for grounding, over current protection and the presence of any aluminum wiring which can cause a fire hazard. For the plumbing system, the inspector should test the water supply, the pressure of the water and the distribution system. While inspecting the plumbing system, the house inspector should also check for leaks in and outside the house. The heat and air conditioning system should be checked by turning up the thermostat and monitoring the response. If the source of the energy is oil, the inspector should check the condition of the oil tank and pipes from the oil tank.
A good home inspection involves the mentioned processes and results in a lot of information about the condition of a house. These basic processes are essential to determining the condition of a house. While monitoring the house inspection, ensure all the above is carried out.